Ironton OHV Horizontal Engine 420cc 1in. (25.4mm) x 2 27/32in. (72.2mm) Shaft
Product Summary
This Ironton® OHV Horizontal Engine is an easy-to-install solution for small engine needs. With 420cc and 18 ft./lbs. Gross Torque, this 500-hour engine provides enough power to run a wide range of equipment, including log splitters and pressure washers. Its design incorporates a cast iron cylinder sleeve and dual ball bearing crankshafts. Low-oil shutdown turns the engine off if it runs low on oil, preventing serious damage or failure. The recoil start has a compression release that helps you get running on the first pull.
Key Specs
| Item# | 45752 |
| Brand | Ironton |
| Manufacturer’s Warranty | 3 months parts / 3 months labor |
| Ship Weight | 75.0 lbs |
| Engine Displacement | 420 cc |
| Engine Type | OHV |
| Start Type | Recoil |
| Shaft Diameter | 1 in |
| Shaft Length | 2.84 in |
| Shaft Diameter Metric | 25.4 mm |
| Shaft Length Metric | 72.2 mm |
| Shaft Output | Horizontal |
| Shaft Keyway | 0.25 in |
| Shaft End Tapped (Diameter (in.)/Threads per inch) | 3/8-24 UNF2B |
| Shaft Rotation (From PTO Shaft Side) | Counterclockwise |
| PTO Height | 5.2 in |
| Cylinders (qty.) | 1 |
| Cylinder Bore | Cast iron |
| Cooling System | Air cooled |
| Bore | 3.54 in |
| Stroke | 2.6 in |
| Air Cleaner Type | Pleated paper w/foam pre-cleaner |
| Fuel Tank Capacity | 6.34 qt |
| Oil Capacity | 1.1 qt |
| Low Oil Alert | Yes |
| Lubrication System | Splash |
| Ignition System | Electronic |
| Governor System | Mechanical |
| Carburetor | Float/choke |
| Max. RPM | 3,800 |
| Muffler Included | Yes |
| CARB Approval | No |
| Bolt Circle | 5, 6.5 in |
| Mounting Base Length | 3.7 in |
| Mounting Base Width | 7.7 in |
| Dimensions L x W x H (in.) | 19.7 x 17.7 x 19.7 in |
Reviews
There are no reviews yet.