MAKITA XT451T 18-VOLT 4-TOOL 5.0AH DRIVERS / GRINDER / FLASHLIGHT COMBO KIT

  • Description
  • Additional information
  • Reviews (0)

Description

FEATURES

18-Volt 1/2-Inch Hammer Driver-Drill – XPH07Z

    • BL Brushless Motor delivers 1,090 in.lbs. of Max Torque
    • 0-31,500 BPM for fast hammer drilling in masonry materials
    • Efficient BL Brushless motor is electronically controlled to optimize battery energy use for up to 50-Percent longer run time per charge
    • The BL Brushless Motor eliminates carbon brushes, enabling the BL Motor to run cooler and more efficiently for longer life
    • The electronically-controlled BL Brushless Motor efficiently uses energy to match torque and RPM to the changing demands of the application
    • All metal variable 2-speed transmission (0-550 and 0-2,100 RPM) for a wide range of drilling, fastening and hammer drilling applications
    • All metal gears and gear housing for maximum job site durability
    • All metal 1/2 self ratcheting chuck for improved bit gripping strength and durability
    • Compact and ergonomic design at only 8-1/8 long
    • Weighs only 5.9 lbs. with battery (battery not included) for reduced operator fatigue
    • 3-stage L.E.D. gauge indicates battery charge level
    • Extreme Protection Technology (XPT) is engineered for improved dust and water resistance for operation in harsh conditions
    • Rubberized soft grip provides increased operator comfort
    • Dual L.E.D. lights illuminate the work area

18-Volt 1/4-Inch 3-Speed Impact Driver – XDT14Z

    • Quick-Shift Mode uses the brushless motor’s electronic controls to find the best balance of speed and torque for each application for more efficient fastening
    • Tightening Mode (T-mode) for faster tightening of self-drilling screws; helps prevent damage to the screw or workpiece
    • 3-speed power selection switch (0-1,100 / 0-2,100 / 0-3,600 RPM and 0-1,100 / 0-2,600 / 0-3,800 IPM) provides precise fastening control for a wide range of applications
    • BL Brushless Motor delivers 3,600 Max RPM and 1,550 in.lbs. of Max Torque
    • Efficient BL Brushless motor is electronically controlled to optimize battery energy use for up to 50-Percent longer run time per charge
    • The BL Brushless Motor eliminates carbon brushes, enabling the BL Motor to run cooler and more efficiently for longer life
    • Features Extreme Protection Technology (XPT) which is engineered to provide increased dust and water resistance in harsh job site conditions
    • The electronically-controlled BL Brushless Motor efficiently uses energy to match torque and RPM to the changing demands of the application
    • Compact and ergonomic design at only 4-5/8 long
    • Weighs only 3.3 lbs. with battery (battery not included) for reduced operator fatigue
    • All metal gear housing for increased job site durability
    • Convenient one-touch 1/4 hex chuck for quick bit changes
    • Dual L.E.D. lights with an independent on/off switch illuminate the work area
    • Rubberized soft grip provides increased comfort on the job

18-Volt 4-1/2 / 5-Inch Cut-Off/Angle Grinder – XAG09Z

    • Electric brake stops the grinding or cut-off wheel in 2 seconds or less for maximum productivity
    • Electronic Torque Control turns the motor off if rotation speed suddenly slows or wheel is forced to stop
    • Automatic Speed Change technology adjusts speed and torque during operation for optimum performance
    • The BL Brushless Motor eliminates carbon brushes, enabling the BL Motor to run cooler and more efficiently for longer life
    • Efficient BL Brushless motor is electronically controlled to optimize battery energy use for up to 50-Percent longer run time per charge
    • The electronically-controlled BL Brushless Motor efficiently uses energy to match torque and RPM to the changing demands of the application
    • Compact and ergonomic design at only 14-1/4 long
    • Weighs only 5.7 lbs. with battery (battery not included) for reduced operator fatigue
    • Rubberized soft grip provides increased comfort on the job
    • Slide switch with lock-on for operator convenience
    • 3-stage L.E.D. gauge indicates battery charge level
    • Soft start suppresses start-up reaction for smooth start-ups and longer gear life
    • Spiral bevel gears for smoother rotations and a more efficient transfer of energy
    • Anti-restart protection engineered to prevent motor start up when battery is inserted with switch locked on
    • Efficient internal cooling is engineered for optimum performance
    • Wire mesh intake covers are engineered to prevent debris from entering motor

18-Volt L.E.D Flashlight – DML802

  • High-luminance single L.E.D. flashlight provides 160 lumens
  • 12 position pivoting flashlight head with positive stops from 60-Degrees – 110-Degrees
  • Aluminum flashlight head design for increased durability
  • Metal hang hook is convenient and job site durable
  • Multi-faceted reflector controls the direction and spread of the light
  • L.E.D. and provides a sharp, round spotlight
  • Compact and ergonomic design at only 10-3/4 long
  • Weighs only 2.1 lbs. with battery (battery and charger not included)
  • Rubberized soft grip provides increased comfort on the job
  • An ideal addition to any toolbox or workshop
WHAT’S IN THE BOX
  • 18-Volt 1/2-Inch Hammer Driver-Drill – XPH07Z
  • 18-Volt 1/4-Inch 3-Speed Impact Driver – XDT14Z
  • 18-Volt 4-1/2 / 5-Inch Cut-Off/Angle Grinder – XAG09Z
  • 18-Volt L.E.D Flashlight – DML802
  • (2) 18-Volt 5.0Ah Lithium-Ion Battery
  • 18-Volt Lithium-Ion Rapid Optimum Charger
  • Tool Bag
  • Owner’s Manual
WARRANTY
  • 3-Year Limited Factory Warranty
  • 30 Day Satisfaction Guaranteed
SPECIFICATIONS
Sku XT451T
Brand Makita
Voltage 18v
Amp Hour 5.0Ah
Tool Count 4
Shipping Weight 27 lbs.
18-Volt 1/2-Inch Hammer Driver-Drill – XPH07Z
Chuck Size 1/2 in.
Chuck Type Keyless
Capacity (Masonry) 5/8 in.
Capacity (Steel) 1/2 in.
Capacity (Wood) 3 in
Blows Per Minute (2-Speed) 0 – 8,250 / 0 – 31,500 Bpm
No Load Speed (2-Speed) 0 – 550 / 0 – 2,100 Rpm
Max. Torque 1,090 in-lbs.
LED Light Yes
Length 8-1/8 in.
Product Weight 5.9 lbs.
18-Volt 1/4-Inch 3-Speed Impact Driver – XDT14Z
Drive Size 1/4 in.
Drive Type Hex
No Load Speed (3-Speed) 0 – 1,100 / 0 – 2,100 / 0 – 3,600 Rpm
Impacts Per Minute (3-Speed) 0 – 1,100 / 0 – 2,600 / 0 – 3,800 Ipm
Max. Torque 1,550 in-lbs.
Length 4-5/8 in.
Product weight 3.3 lbs.
18-Volt 4-1/2 / 5-Inch Cut-Off/Angle Grinder – XAG09Z
Wheel Diameter 5 in.
No Load Speed 0 – 8,500 rpm
Variable speed Control Dial No
Spindle Thread 5/8 – 11 UNC
Lock On Switch Yes
Lock-Off No
Length 14-1/4 in.
Product Weight 5.7 lbs.
18-Volt L.E.D Flashlight – DML802
Lumens 200
Run Time (Max.) 21 Hours
Bulb 6 LED
Length 10-3/4 in.
Product Weight 2.1 lbs.

Additional information

Brands

Bosch

Reviews

There are no reviews yet.


Be the first to review “MAKITA XT451T 18-VOLT 4-TOOL 5.0AH DRIVERS / GRINDER / FLASHLIGHT COMBO KIT”

You've just added this product to the cart: