MAKITA XT450T 18-VOLT 4-TOOL DRILL DRIVERS / RECIPRO SAW / FLASHLIGHT COMBO KIT

  • Description
  • Additional information
  • Reviews (0)

Description

FEATURES

18-Volt 1/2-Inch Cordless Hammer Driver-Drill – XPH07Z

    • BL Brushless Motor delivers 1,090 in.lbs. of Max Torque
    • 0-31,500 BPM for fast hammer drilling in masonry materials
    • Efficient BL Brushless motor is electronically controlled to optimize battery energy use for up to 50-Percent longer run time per charge
    • The BL Brushless Motor eliminates carbon brushes, enabling the BL Motor to run cooler and more efficiently for longer life
    • The electronically-controlled BL Brushless Motor efficiently uses energy to match torque and RPM to the changing demands of the application
    • All metal variable 2-speed transmission (0-550 and 0-2,100 RPM) for a wide range of drilling, fastening and hammer drilling applications
    • All metal gears and gear housing for maximum job site durability
    • All metal 1/2 self ratcheting chuck for improved bit gripping strength and durability
    • Compact and ergonomic design at only 8-1/8 long
    • Weighs only 5.9 lbs. with battery (battery not included) for reduced operator fatigue
    • 3-stage L.E.D. gauge indicates battery charge level
    • Extreme Protection Technology (XPT) is engineered for improved dust and water resistance for operation in harsh conditions
    • Rubberized soft grip provides increased operator comfort
    • Dual L.E.D. lights illuminate the work area
    • Equipped with Star Protection Computer Controls to protect against overloading, over-discharging and over-heating

18-Volt 3-Speed Cordless Impact Driver – XDT14Z

    • Quick-Shift Mode uses the brushless motor’s electronic controls to find the best balance of speed and torque for each application for more efficient fastening
    • Tightening Mode (T-mode) for faster tightening of self-drilling screws; helps prevent damage to the screw or workpiece
    • 3-speed power selection switch (0-1,100 / 0-2,100 / 0-3,600 RPM and 0-1,100 / 0-2,600 / 0-3,800 IPM) provides precise fastening control for a wide range of applications
    • BL Brushless Motor delivers 3,600 Max RPM and 1,550 in.lbs. of Max Torque
    • Efficient BL Brushless motor is electronically controlled to optimize battery energy use for up to 50-Percent longer run time per charge
    • The BL Brushless Motor eliminates carbon brushes, enabling the BL Motor to run cooler and more efficiently for longer life
    • Features Extreme Protection Technology (XPT) which is engineered to provide increased dust and water resistance in harsh job site conditions
    • The electronically-controlled BL Brushless Motor efficiently uses energy to match torque and RPM to the changing demands of the application
    • Compact and ergonomic design at only 4-5/8 long
    • Weighs only 3.3 lbs. with battery (battery not included) for reduced operator fatigue
    • All metal gear housing for increased job site durability
    • Convenient one-touch 1/4 hex chuck for quick bit changes
    • Dual L.E.D. lights with an independent on/off switch illuminate the work area
    • Rubberized soft grip provides increased comfort on the job
    • Makita’s proprietary hammer and anvil impact mechanism is manufactured using the best raw materials with the highest quality steel and unique heat hardening process for maximum fastening and driving power
    • Equipped with Star Protection Computer Controls to protect against overloading, over-discharging and over-heating
    • Makita technology delivers category-leading charge time so the battery spends more time working and less time sitting

18-Volt Cordless Recipro Saw – XRJ05Z

    • Makita-built variable 2-speed brushless motor delivers 0-2,300 (Low) and 0-3,000 (High) strokes per minute and a 1-1/4 stroke length for faster cutting
    • Tool-less blade change system allows for faster blade installation and removal for increased productivity
    • Variable speed trigger for added convenience
    • Compact and ergonomic design at only 17-1/4 long
    • Weighs only 8.2 lbs. with battery (battery not included) for reduced operator fatigue
    • Rubberized soft grip handle provides increased comfort on the job
    • Reinforced fixed shoe for added durability
    • Large two-finger variable speed trigger for operator convenience
    • Electric brake for maximum productivity
    • Refined crank mechanism design minimizes blade deflection and reduces vibration
    • Extreme Protection Technology (XPT) is engineered for improved dust and water resistance for operation in harsh conditions
    • Equipped with Star Protection Computer Controls to protect against overloading, over-discharging and over-heating

18-Volt Cordless L.E.D Flashlight – DML802

  • High-luminance single L.E.D. flashlight provides 160 lumens
  • 12 position pivoting flashlight head with positive stops from 60-Degrees – 110-Degrees
  • Aluminum flashlight head design for increased durability
  • Metal hang hook is convenient and job site durable
  • Multi-faceted reflector controls the direction and spread of the light
  • L.E.D. and provides a sharp, round spotlight
  • Compact and ergonomic design at only 10-3/4 long
  • Weighs only 2.1 lbs. with battery (battery and charger not included)
  • Rubberized soft grip provides increased comfort on the job
  • An ideal addition to any toolbox or workshop
WHAT’S IN THE BOX
  • 18-Volt 1/2-Inch Cordless Hammer Driver-Drill – XPH07Z
  • 18-Volt 3-Speed Cordless Impact Driver – XDT14Z
  • 18-Volt Cordless Recipro Saw – XRJ05Z
  • 18-Volt Cordless L.E.D Flashlight – DML802
  • (2) 18-Volt 5.0Ah Lithium-Ion Battery – BL18505B
  • 18-Volt Lithium-Ion Rapid Optimum Charger – DC18RC
  • Tool Bag
  • Owner’s Manual
WARRANTY
  • 3-Year Limited Factory Warranty
  • 30 Day Satisfaction Guaranteed
SPECIFICATIONS
Sku XT450T
Brand Makita
Voltage 18
Amp Hour 5.0Ah
Tool Count 4
18-Volt 1/2-Inch Cordless Hammer Driver-Drill – XPH07Z
Drive Size 1/2 in.
Drive Type All Metal Self Ratcheting Chuck
Blows Per Minute (2-Speed) 0-8,250 / 0-31,500 Bpm
No Load Speed (2-Speed) 0-550 / 0-2,100 Rpm
Max. Torque 1,090 in-lbs.
Drilling Capacity (Masonry) 5/8 in.
Drilling Capacity (Steel) 1/2 in.
Drilling Capacity (Wood) 3 in.
Length 8-1/8 in.
Product Weight 5.9 lbs.
18-Volt 3-Speed Cordless Impact Driver – XDT14Z
Drive Size 1/4 in.
Drive Type Hex
Impacts Per Minute (3-Speed) 0-1,100 / 0-2,600 / 0-3,800 Ipm
No Load speed (3-Speed) 0-1,100 / 0-2,100 / 0-3,600 Rpm
Max. Torque 1,550 in-lbs.
Length 4-5/8 in.
Product Weight 3.3 lbs.
18-Volt Cordless Recipro Saw – XRJ05Z
Length of Stroke 1-1/4 in.
Max. Cutting Capacity (Wood w/ 12-Inch Blade) 10 in.
Max. Cutting Capacity (Pipe) 5-1/8 in.
Strokes Per Minute (2-Speed) 0-2,300 / 0-3,000 Spm
Length 17-1/4 in.
Product Weight 8.2 lbs.
18-Volt Cordless L.E.D Flashlight – DML802
Run Time (Max. in Hours) 21 Hrs.
Bulb (6) L.E.D
Lumens 200
Length 10-3/4 in.
Product Weight 2.1 lbs.

Additional information

Brands

Bosch

Reviews

There are no reviews yet.


Be the first to review “MAKITA XT450T 18-VOLT 4-TOOL DRILL DRIVERS / RECIPRO SAW / FLASHLIGHT COMBO KIT”

You've just added this product to the cart: